How to glue non-woven wallpaper: the technology and video instruction
- 04 Jul 05:15
- Construction And Repair
Non-woven, despite its higher cost, squeezed from the market their paper counterparts.More and more buyers when choosing wallpaper preference for them.This is due to the unique qualities of the decorative finishing material, which is sticking process is easy.If you already have experience with paper wallpaper, you can feel the difference.Everyone knows how to choose a non-woven wallpaper, but how to glue, and what to look for in this case, you can read below.
properties of non-woven wallpaper ↑
as the basis of the finishing material manufacturers use interlining.So called non-woven fabric, is widespread in the clothing business.Items of clothing glued fleece, hold the form and are not subjected to tension.After interlining robust, durable, able to maintain its size.
- resistant to stretching;
- do not shrink;
- not exude substances harmful to health;
- resistant to fading.
With a meter wide, non-woven wallpaper allow to halve the number of joints, which after proper bonding panels become invisible.
thickness of wallpaper on non-woven backing to hide minor irregularities of the wall.
Required Tools and Accessories ↑
- brush for applying wallpaper paste;
- bucket of glue for breeding;
- special roller for smoothing the wallpaper;
- narrow roller for the seams in the joints;
- building level or plumb line;
- cloth or sponge to remove excess glue;
- scissors and a knife;
How to glue non-woven wallpaper ↑
1. Work on preparing the room for repairs.All small pieces of furniture carried into other rooms.Bulky items, pushing the walls, are covered with a protective film carefully.
2. Running cleaning the walls of the old paper wallpaper or other coating.Do not forget to moisten the old wallpaper is not separated from the wall surface.Thus saving time and nerve cells.Otmokshie behind wallpaper easily and removed with a spatula.If the walls are painted areas, they are washed with water and sanded.The rough surface will provide better coupling with it the solution of glue.
3. Do not forget!The next step is to do the ceiling finish.
4. Immediately before the wallpapering process, divorce glue that is designed for non-woven wallpaper.To do this takes a clean bucket, which is then poured into cold water in the right quantities, specified in the instructions.Next, create a whirlpool and on the edge of the bucket is poured a thin stream of dry glue out of the box.Adhesive solution was left alone for 15 minutes, after which it was again mixed thoroughly.The adhesive is ready, you can begin to work.
5. Non-woven wallpaper glue butt, so you can start from where convenient and efficient, in terms of material consumption.For good measure, the first web bonding required by a plumb-line straight vertical line, which will serve as a guide for placing the sideline wallpaper.
6. and measure web.To do this, the roll is unwound, and non-woven wallpaper applied to the wall.The top and bottom to make notes in pencil on which wallpaper added.Then the incision is made along the bending of scissors or a sharp knife.Some artists prefer to leave a small margin Wallpaper, both above and below.Motivated by the fact that it is better let it remain, than not enough.After gluing cut off the excess.
7. wallpaper paste with a brush or roller to apply only to the wall.This is the main difference between the process pasting room Non-woven wallpaper.Dry leaf superimposed on the wall, attain to the level marked on the vertical and rolled up with a rubber roller.Some artists prefer to use rollers instead of the broad brush or special plastic spatula.In this adhesive residue is squeezed out of the cloth is removed with a damp cloth.
8. The following list is cut based on the pattern, if any.Fabrics stick butt.
9. Leave the new wallpapers to completely dry for a day.Thus the rate of drying affects the degree of absorption of the walls and the room temperature.
Fixing material in the corners ↑
smooth walls hang wallpaper like all masters can not be said about the angles.After all, experts know that you have to work hard, because the rooms seldom perfectly aligned edges.Members generally are at a loss, not knowing how pokleit non-woven wallpaper in the inner corners.Professional-finishers make it so:
1. Paste the fabric so that the edge of a little sign on the wall of an adjacent corner.
2. The following bands overlap glue, that is, it comes to the canvas, glued in the corner, a few centimeters.Use a plumb bob to locate the edge exactly.
3. Use a ruler by which to conduct mock knife incision of two layers glued wallpaper.Remove the cut edge, with the ruler pressed against the wallpaper.This avoids their rupture.
4. lift the edge of the wallpaper so out of it clean second cut edge.Thereafter glue is applied to further smooth and joint.Surplus wallpaper paste is removed with a damp cloth.
As wallpaper glue around outlets ↑
Caps with sockets and switches and should be removed, do not forget to turn off pre-apartment electricity.Wallpapering and on-site installation of sockets and switches make an incision in the shape of a cross.The edges are cut or folded.Remove the cover set in place.Some try to make holes in the wallpaper and pasted outlet without removing the cover.However, it is difficult to achieve perfect accuracy.
How to glue non-woven wallpaper: a video guide ↑
now all the secrets on how to correct non-woven wallpaper pokleit disclosed.You can easily get down to business, coming up with the most incredible way to finish the interior with the help of this unique material.You can combine a variety of colors, stick contrasting borders or making bright-panel inserts.Your home is waiting for the changes, and you can now make their own hands.Mistress will appreciate the ease of care Non-woven wallpaper.Their surface can be cleaned with a soft dust broom, vacuum cleaner or even a damp cloth.If heavily soiled, wallpaper and paint are exposed to, literally, like new.